GMC  x   >   !Peterbilt  x   >   Cadillac  x   >  

Im wondering if the # MT70101 carrier is the right one for me. I installed a Draw Tite trailer hitch 75682 on my 2012 Cadillac SRX, so the tongue weight is at 400 lb. With my scooter weighing close to 315 lb. and the weight of the scooter...

I have a 2013 Cad, SRX. I am going to use EZ4 Base plates RM523162-4 and want to use the Nighthawk toe bar RM-676. Will I need a cross bar? If so will I be able to remove the bar with little trouble when not in use. | Yes, for the Roadmaster...

I have a 2013 cadillac srx with factory cross bars. What would be the best kayak hauler option form me. I have a tandem and a single. I am more concerned about having a hauler that can haul the tandem. | We have several kayak carriers that will...

Have a 2o13 cadillac xts luxury am handicapped ,want to knoww if trailer hitch could accomodatre a drive on mobility scotter total weight of 200 lbs | Trailer hitch receivers to fit your 2013 Cadillac XTS, like the Draw-Tite # 36538, are Class...

I’m trying to become an RV person and I’m currently thinking that I’m going to go with a 5th Wheel RV and Truck. That could change. In fact, it might change latter today, LOL But my serious question is how do I know if I must purchase a long...

will this fit my 2020 cadillac xt5 premium luxury? Item # C13285 | The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13285 you were looking at is confirmed to fit all models of the 2020 Cadillac XT5 and will fit perfectly on...

What is the size of the included bolts for the hitch installation? I will need to get a tap to clean out the existing holes on the SRX. Car is a 2010 SRX. Thanks | The bolts used to install the Curt Trailer Hitch Receiver # C13002 you were looking...

Im trying to install the ETBC7 on a 2006 Cadillac SRX and having trouble finding the cold side of the brake switch. I can see the switch white flat cylindrical but the wires to it are very difficult to reach and are surrounded by a loom. I...

I’m installing the Roadmaster base plate on my 2015 Cadillac SRX. I noticed that when you tighten the 3” bolt that goes through the bumper, it crushes the back of the bumper. It doesn’t appear to hurt anything, just making sure that this is...

Wanting class 3 hitch for 2006 Cadillac SRX AWD. | To add a class III hitch to your 2006 Cadillac SRX, I recommend the Curt Trailer Hitch item # C13050. This hitch is custom fit and bolts to your Cadillac with included hardware. This hitch has...

I need a hitch for a 2021 Cadillac CT-5,rear wheel drive. Do you have it,or can you get one? Thank You | I do have a solution, but nobody makes a custom-fit hitch for the 2021 Cadillac CT5. This means the only option is to have a custom hitch...

I would like a Bike rack for my Cadillac CTS-V Wagon. I can not seem to search for this specifically. There are products that seem to strap onto the top and bottom of hatches whether a Wagon or SUV though its hard to determine if they work on...

Im not familiar with the car myself. Its my brothers car. The transmission quit working and apparently, the tranny fluid has gotten into the engine coolant. Folks are telling me that the tranny cooler is under the Intake Manifold... Which is...

I am about to purchase this vehicle to flat tow behind a 10k rated motorhome. what will i need? | For flat towing your 2013 Cadillac Escalade, you will need the following items: base plate kit, tow bar, a set of safety cables, tow bar wiring,...

Does the Thule OutWay 3 bike rack fit onto the 2010 Cadillac SRX? Will the top foam hit the bottom of the roof spoiler? | Yes, we checked with Thule and the OutWay part # TH56BV that you referenced is a confirmed fit for your 2010 Cadillac...

Blue Ox Base Plate Kit - BX1716 Your website says this doesnt fit a platinum model Escalade, but the manufacture doesnt mention anything about it not fitting a platinum. Do you have any more information about why it wont work on a platinum...

Can power for lights come battery in rear of car or does it need to come from main battery iin engine compartment ? | When you install the Tekonsha trailer wiring harness part # C56180 in your 2014 Cadillac ATS you have to run the wire up to...

Hello, I have a 2012 Escalade ESV and am interested in the Curt Echo brake controller, part C51180. Ive been reading about how GM does not have the brake controller wires connected to a harness anymore but Im confused on whether this applies...

How much does this jack weigh | The Stromberg Carlson Electric Trailer Jack # JET-3755 weighs right at 26 pounds. With a 3,500 pound capacity and 24 inches of lift, this is a great option for any trailer. |

looking for cross rails for 2023 cadillac xt4 | By cross rails I believe you are referring to a roof rack, and we do have a fit for a roof rack on your 2023 Cadillac XT4, from Yakima. The rack consists of the following parts: - Yakima JetStream...

is this submersible Redline Mini Thinline Clearance or Side Marker Light - LED - Red w/ Black Base Item # LT02-230 | Yes, the Redline Mini Thinline Clearance or Side Marker Light # LT02-230 is submersible. It features a sonically sealed lens...

what do i need to mount this light on my trailer light was ripped off Thinline LED Clearance and Side Marker Light - Submersible - 3 Diodes - Rectangle - Red - AL91RB | The Optronics Thinline Submersible Red LED Clearance and Side Marker Light...

I Have the Demco SMI Duo installed on my 2016 Cadillac SRX Toad for about 4 months now. This week on a long trip, I encountered my first problem with this braking. I blew the systems 20 amp fuse. I replaced the fuse, and now it is working...

My TV is a 2014 Cadillac SRX. It has a 4 pin flat wiring connection. The small tear camper I just purchased has a 7 pin round plug. What are my best options? Where can I have this kind of work done? Should I have a brake controller installed...